汽车底盘间隙仪
技术特性和功能：
可方便地检查汽车悬架和转向系统的零部件配合间隙。将汽车前轮或后轮置于本机两块测试板上，可遥控操纵两块测试板做纵向、横向运动，即可检查出汽车横直拉杆、球头、转向支臂、轩轮轴承等间隙。汽车底盘间隙仪由两个移动板组成，用于辅助验证车辆底盘中的间隙状况。此由三部分组成：2个活动测试台板、液压系统和电气控制系统（带无线遥控器和手电筒）
- 武钢优质钢材高强度台体，低噪音结构设计
- 名牌液压元器件，性能稳定可靠。
Technical features & functions
The tester is convenient to check the fitting clearance between the parts of the automobile suspension and steering system. Place the front or rear wheels of the car on two test boards of the machine,It can remotely control two test plates to do longitudinal and lateral movement, and can check the clearance of automobile horizontal tie rod, ball head, steering arm, Xuan wheel bearing, etc. The play detector, with two moving plates of play detector, is assisted to verify the joint play condition in a vehicle chassis. The play detector is made by three parts: 2x moving plates, hydraulic system and electric control system (with wireless remote & torch)
- Hydraulic unit increases user convenience
- Extra heavy duty structure, robust and lower noise design
技术参数Technical parameters
| 型号 Model | CTJX-3 | CTJX-13 |
| 最大允许轴荷（kg） Max. axle load (kg) | 3000 | 13000 |
| 滑板尺寸（mm） Plates dimensions (mm) | 760*500 | 1000*750 |
| 工作方式 Operate mode | 液压驱动 Hydraulic drive | 电源电压（V） Power supply (V) | AC380 |
| 滑板移动量（mm） Movement of plates (mm) | ±50 | 电机功率（kw） Motor power (kw) | 3 |
| 滑板最大移动力（kN） Max. displacement force of plate (kN) | 20 | 移动方向 Direction of movement | 左滑板：前后左右 右滑板：前后 Left board: front, back, left and right Right board: front and rear |
| 滑板移动速度（mm/s） movement speed of plates (mm/s) | 60-80 | 控制方式 The control method | 无线遥控 The wireless remote control |
关注微信公众号！
