汽车车速表检验台

产品描述:

汽车车速表检验台用于检测在行驶状态下,机动车速度表指示误差的检测设备,是机动车安全性能检测的重要设备之一。

主要性能特点:

◆机体采用整体焊接,强度高,无需地脚螺栓安装,调试方便

◆滚筒表面采用特殊滚花处理,强度高,耐磨,摩擦系数大

◆采用气囊举升,举升同步性好,方便车辆进出,提高检测效率。

◆双重安全保险装置,控制系统具有当滚筒转速高于5 km/ h时,举升机构自动闭锁的功能,确保测试安全

◆带有挡车轮,保护车轮在高速运转时不刮到台体。

◆配备非接触式传感器不仅测试精度还高经久耐用,

◆测速范围广,测试点速度配置无线遥控器控制

技术参数Technical parameters

型号Model CTCS-3A CTCS-10A CTCS-15A
最大允许轴载质量(kg) Max. axle-load (kg) 3000 10000 15000
轮距(内宽/外宽)(mm) Applied wheel tread (width/wide) (mm) 700(内width)/2400(外wide) 700(内width)/2700(外wide) 700(内width)/2900(外wide)
检测速度(km/ h) Test speed (km/h) 0—130 0—130 0—130
滚筒直径×长度(mm) Roller diameter x length (mm) ∮190×850 ∮190×1100 ∮190×1100
气压气源 Air supply 0.5-0.6 MPa 0.7-0.8 MPa 0.7-0.8 MPa
外型尺寸(长×宽×高)(mm) Dimensions (mm) 2700×750×400 3200×900×480 3200×900×480

Introduction:
The vehicle speedometer tester is used to detect the indication error of the speedometer when the vehicle is running. Vehicle speedometer tester is one of the important equipment of vehicle safety performance test.


Main features:
◆Using of reinforced steel guarantees strong and durable structure-bodies, no need for anchor bolt installation, convenient debugging
◆The roller surface is specially knurled, with high strength, wear resistance and large friction coefficient
◆It adopts air bag lifting with good lifting synchronicity, which is convenient for vehicle in and out and improves detection efficiency.
◆Double safety device, the control system has the function of automatic locking of lifting mechanism when the roller speed is higher than 5 km / h, to ensure the test safety
◆It is equipped with security device to protect the wheel from scratching the tester when it is running at high speed.

◆Equipped with non-contact sensor, it not only has high test accuracy but also is durable

◆The speed measurement range is wide, and the speed of the test point is controlled by the wireless remote control