产品描述：
汽车悬架装置检测台是通过机械激振使汽车悬架系统产生谐振来测量汽车车轮动态接力和 车轮静态接地力以判定和分析悬架台装置性能的检测装置.可用于检测机动车静态载荷时的轮重，检测同轴左右轮悬架装置吸收之差。主要是测试减震器的性能。
主要特性和特点：
机体采用整体焊接，强度高，方便安装调试
采用低噪音结构设计，减少因设备自己噪音而产生的振动干扰。
使用界面操作方便，易学易用
采用进口减振器、优质高精度传感器，性能稳定，维修保养简单
检测速度快、测试数据精度高、标定方便，重复性好
以图表显示的检测结果，方便对比悬架维修前后的情况
大马力电机，安全可靠。
基于EUSAMA测量标准，产品执行满足交通部行业标准JT/T448-2001《汽车悬架装置检测台》
技术参数
| 型号 Model | CTXX-3 | CTXX-10 |
| 最大通过的轴荷（㎏） Max. pass axle load (KG) | 4000 | 10000 |
| 允许检测荷重（㎏） Max. test axle load (KG) | 3000 | 3000 |
| 激振频率（Hz） Vibration Frequency (HZ) | ≧23 | ≧23 |
| 吸收率重复误差 Deviation of Repeatability of Absorption Rate | ≦2％ | ≦2％ |
| 轴载示值误差 Deviation of Axle Weight Indicating Value | ≦2％ | ≦2％ |
| 振幅（mm） Oscillation | 6 | 6 |
| 电机功率（KW） Motor Power (KW) | 2×2.2 | 2×2.2 |
| 适用轮距（㎜） Applicable Tread (Inner Width/Outer Width) (mm) | 800/2200 | 800/2700 |
| 电源 Power Supply | AC380V 50Hz | AC380V 50Hz |
Vehicle Suspension Tester is used to inspect the shock absorption performance of vehicles with independent suspension system. When the vehicle parks on the platform, the static wheel load will be measured by the sensor and displayed on the Monitor/Display Board. Then the motor will start to drive the Eccentric Wheel in the tester, which subsequently results into the vibration of Vibrating Plate. The motor will shut down automatically after reaching its nominal power. The plate will continue vibrating because of inertia, and result in sympathetic vibration between wheels and suspension. The minimum dynamic wheel load will be obtained during the sympathetic vibration. Then the absorption rate (displayed as percentage) can be calculated. The higher the absorption rate is, the better the suspension performance of the vehicle will be.
- Galvanized plates with longer service life, The machine body adopts integral welding with high strength, which is convenient for installation and debugging
- Low noise structure design is adopted to reduce vibration interference caused by equipment noise.
- The software interface is easy to operate, learn and use
- Imported shock absorber and high-quality and high-precision sensor are adopted, with stable performance. Easy maintenance of products
- Which can test fast with high accuracy of test data, convenient calibration and good repeatability
- The test results display in the visual graph are convenient to compare the situation before and after the suspension maintenance
- High power motor, safe and reliable.
- Based on the EUSAMA measurement standard, the product meets the industry standard JT / T448-2001
关注微信公众号！
