汽车底盘测功机（马力机）-4WD

产品描述

• 马力机就是专门测试汽车底盘动力的设备，也是一种底盘测功机。它能够准确反映汽车各转速下的动力性能，方便汽车动力调校；它采用的检测科学的方法利用系统惯量自适应算法能够很准确地计算出汽车底盘输出功率。还能检测最高车速、加速时间（性能）等。控制系统采用高速数据总线，带WIFI接口，控制计算机可以采用PC电脑或笔记本电脑等，方便操作。可以对汽车进行常规和模拟路况检测随时了解爱车的状况。非常适合二手车评估中心,汽车修理厂,汽车改装，ECU调校行业。
• 主要特性和特点
•  1测试动力数据：马力机的全区域转速的马力扭力/曲线能准确地反映出任意转速(通常2000转以上）的发动机工作情况，其中最突出的是最大马力和扭矩的输出值。
• 2可模拟上路测试：马力机的滚筒可以由控制电脑来设定阻力，模拟出路面的各种阻力情况，只要调节得当，在马力机上跑出几十甚至200kw/h已上的速度都是很安全的。
• 3汽车动力状况的诊断：一台功能强大的马力机具有钟的诊断方法。如使用恒速的功能，马力机可以使用恒速的功能，马力机可以使汽车限定在一个想要的速度（一个合理的速度），此时同一档位下转速(RPM）是不变的，改变油门开合度或者ECU工作参数可以得到不同的即使马力输出，配合爆震听筒、空燃比计、空气流量计等可以更好地判断出车子即使工作状。

四驱马力测功机是专门用于测量二驱和四驱汽车的底盘动力性能的设备，不仅能准确测量各转速下的动力性能，还可模拟路面对车辆进行常规和多路况路试，也可用于汽车改装和ECU跳校等。

The 4WD horsepower dynamometer is specially used to measure the chassis dynamic performance of the 2WD and 4WD vehicles. It can not only accurately measure the dynamic performance at each speed, but also simulate the road to carry out the road test of routine and multi-road of the vehicles, and can also be used for vehicle refitting and ECU debugging and calibration , etc.

Introduction：

Horsepower machine is specialized equipment automotive chassis dynamics, but also a chassis dynamometer machine. It reflects the dynamic performance of the car under all speed, convenient vehicle power adjustment; it uses the scientific method to detect the use of the system inertia adaptive algorithm can very accurately meter Calculate the vehicle chassis output power. The control system uses high-speed data bus with WIFI interface, Controlling computer are able to use the PC or laptop, easily to operate. You can  know your car’s condition anytime by the routine test and simulated road conditions test. Ideal for a used car assessment centers, auto repair shop, car adaptations, ECU adjustment industry.

Features:

1．Test power data :region-wide speed horsepower engine /torque curve can accurately The reaction arbitrary rotational speed (typically2000 rpm or more)of the engine operating conditions. The most prominent is the output value of the maximum horsepower and torque.

2．instead of the dangerous road test to tell and simulate the real drive: horsepower machine roller can be set by the control computer blocking Ability to simulate various obstacles on the road ,as long as proper adjustment in horsepower machine Ran dozens or even 200kw/h above the speed is very safe

3．Diagnosis of vehicle power status: a more powerful diagnostic equipment horsepower square bell Method. Such as the use of constant speed function, horsepower machine can make the car in a defined desired Speed (a reasonable rate), this time, the same gear speed  (RPM) is Constant, changing the throttle opening degree or ECU operating parameters that can be different When the horsepower output, with knock handset, air-fuel ratio meter, air flow meter, etc., nay be more Better judge the work status of the car immediately